[Nova-Net] NOVA TUNE

[James Denneny]

I would like to contact someone using Nova Tune preferably with an IC-910H.
My Nova Tune software is version 1 created in 2002.

 

I had NOVA TUNE working years ago and am trying to re-establish a working
setup.  I have configured everything per manual but do not read radio.  LED
"A" flashes indicating power but that's it.  I am connected between Nova
Tune TTL port and IC-910H TTL port using TTLRX1.   910 TTL Port is
configured  "on" at 9600 baud as is Nova Tune.  Parallel Port diagnostics
sends back "352" which means wrong address (378).  When I run diagnostic
changing LPT address to "278", I get a string of "FF FF FF..." which I
believe is telling me that the LPT1 address needs to be "278".  However,
when I try to change parallel port address in Nova Tune from 378 to 278, the
change does not stick.

 

When using the 910 with SatPC32, the radio CAT port is Com1 operating
through a CT17 CIV interface but this is irrelevant with Nova Tune.  

 

I would appreciate any help squaring me away so I can use NOVA to track
satellites and tune the radio.

 

73

 

Jim Denneny

K7EG